Manual

9
INSPECT
. Select the appropriate bulkhead inspection tip that
corresponds to the connector type and install on a
probe.
. Insert the probe into the bulkhead to inspect.
. Determine whether the bulkhead is clean or dirty.
y If clean, do not touch it and CONNECT
y If dirty, CLEAN
Inspect
Inspect Bulkhead
Inspect Patch Cord
. Select the appropriate patch cord inspection tip that
corresponds to the connector type and install on
probe.
. Attach the patch cord to the probe.
. Determine whether clean or dirty.
y If clean, do not touch it and CONNECT
y If dirty, CLEAN