User's Manual Part 1

Chapter 1 WiFi Advisor Overview
About the WiFi Advisor
WiFi Advisor Wireless LAN Analyzer User’s Guide
December 2014 22073751, Rev. 002 Page 5
Bluetooth
The Bluetooth button is the blue button on the top of the instrument. Press and hold
the button for five seconds to make the WiFi Advisor ready to pair.
The LED located below the button indicates the Bluetooth status.
• Slow blinking blue (a short on every few seconds) indicates the instrument is
trying to connect over Bluetooth
• Blinking blue (on but short off every few seconds) indicates the instrument is
connected to the iPad but not currently being used
• Solid blue indicates the instrument is connected to the iPad and is being
used by the iPad
Status
The Status LED indicates the status of the test.
• Blinking amber indicates a test is in progress at that location
• Solid green indicates the test is complete at that location and the test passed
• Solid red indicates the test is complete at that location and the test failed