User's Manual
Chapter 8 Wi-Fi Testing
About Wi-Fi Testing
SmartClass TPS User’s Guide
68 22035456, Rev 001 May 2014
About Wi-Fi Testing
The SmartClass Triple Play Services’s optional Wi-Fi testing features allow performance assess-
ment and troubleshooting the customer premise Wi-Fi network.
The Wi-Fi testing features of the SmartClass include the following:
– Quickly determine the available SSIDs, level and channel of Wi-Fi networks visible from any
location. The test set can attach to a customer's network and provide assessment of the signal
strength throughout the premises.
– Provide a generic Wi-Fi access point (bridged Ethernet to WiFi) to verify IP connectivity, run
tests to back office, or configure CPE.
To access the Wi-Fi tools
– On the Main Menu screen, select Wi-Fi.
The Wi-Fi menu appears.
Depending on your unit configuration, your menu may vary.
Wi-Fi testing is only available on the two Wi-Fi enabled configurations:
CSC-TPSVW and CSC-TPSVW-CU.
Software options also enable certain features.
For additional information about SmartClass Triple Play Services options and services, contact
your local JDSU representative or contact JDSU through the company web site, www.jdsu.com.
Scanning for Wi-Fi networks
The Wi-Fi Network Scan is used to determine whether any Wi-Fi networks are available, and
provides the SSIDs, level and channel of any networks detected.
Figure 11 Wi-Fi menu
Table 11 Wi-Fi software options
Option Description
WiFiTest Allows all of the WiFi related capable test features (WiFi scan & Histo-
gram, connect to a WiFi Network for testing, and WiFi-to-Ethernet Bridge)
Mobile App Connectivity Provides connectivity to the iOs App.