User's Manual

Chapter 5 Ethernet TE Testing
Viewing results
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 45
Viewing results
After specifying test settings and connecting to the line, you can view results.
To view results
1 Do one of the following:
– Press the Cancel key to return to the Network menu, and then select Network Status or
LAN Stats.
– From the Network Setup menu, press the left arrow to move to the LAN Results menu, and
then the left arrow again to move to the Network Status menu.
2 To save a test report, press the utility (i) key and then select Save Report, and then specify
the report settings such as report name, report format, technician ID, location, and other
settings as needed.
3 To clear the results, use the asterisk (*) key.
See Chapter 16 “Test Results” to learn what your results mean.