User's Manual

Chapter 2 Instrument Settings
Setting the date and time
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 25
5 Use the computer’s mouse or keyboard to control the SmartClass Triple Play Services.
Table 7 shows how the PC/laptop keys map to the SmartClass Triple Play Services keypad.
– To enter data (for example, entering a DNS name for a traceroute), use the arrow keys or
mouse to scroll to and highlight the setting to specify, and then press Enter. Use the keyboard
to type the text.
6 To end a remote operation session, on the PC or laptop running the VNC viewer, end the VNC
session.
Table 8 shows the constraints for using the remote access feature.
Setting the date and time
The SmartClass Triple Play Services has an internal clock that you can set to provide accurate time
stamps for test results.
Setting the date
The following procedure describes how to set the date.
To set the date
1 Select System Settings from the Main Menu.
2 Select Hardware Settings, and then Date and Time.
Table 7 PC/laptop to SmartClass Triple Play Services key map
PC/Laptop key SmartClass Triple Play Services Keys
Arrow keys Arrows
Escape Cancel
Enter OK
F5 Utility
Table 8 Remote access support
Test
Remote Access
Wi-Fi Ethernet DSL
DSL with data Supported
Not Available Not Available
Ethernet Test with data Supported Supported Not Available
Wi-Fi Scan Not Available Supported Supported
Wi-Fi EP with data Not Available Not Available Not Available
Wi-Fi AP Not Available Supported Not Available
HPNA Supported Not Available Not Available
Copper Supported Supported
Not Available
SmartID Supported Supported Supported
Optical Power Meter Supported Supported Supported