User's Manual

Chapter 1 Getting Started
Exploring the top panel
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 13
Exploring the top panel
If equipped with the Copper option, the top panel of the SmartClass Triple Play Services includes
three mini-banana jacks, as shown in Figure 4.
These are used to connect to Tip (A), Ring (B), and ground (sleeve or Earth).
Navigating the user interface
The user interface of the SmartClass Triple Play Services is designed to be intuitive and easy to
use. Using the LCD and keypad, you can view test results, set up the unit, and configure test param-
eters. This section describes the user interface, and explains how to navigate through the menus
and screens.
When you power up the SmartClass Triple Play Services, the user interface appears. Figure 5
shows the main menu.
The items on this menu vary, depending on the configuration and options.
Figure 4 SmartClass Triple Play Services top panel
CAUTION: INSTRUMENT DAMAGE
Connecting to circuits with voltage higher than 300V peak-peak, compared to ground, may dam-
age the internal components. Connect only to circuits with less than 300V.
WARNING: ELECTRICAL SHOCK
Electrical shock may result in serious injury or death. Use care when connecting to telecommuni-
cations circuits, to be sure that you do not come in contact with exposed conductors or power
mains. Connect TNV signals to TNV ports only.
Figure 5 SmartClass TPS Main Menu