User's Manual
Chapter 1 Getting Started
Exploring the bottom panel
SmartClass TPS User’s Guide
12 22035456, Rev 001 May 2014
Ethernet connector
Use the Ethernet connector with an Ethernet cable when in either DSL through mode or Ethernet
TE mode.
Exploring the bottom panel
The SmartClass Triple Play Services’s AC Adapter/charger and USB device port are located on the
bottom panel.
NOTE:
The Ethernet port is auto configured to accept either a patch or cross-over cable.
WARNING: ELECTRICAL SHOCK
Electrical shock may result in serious injury or death. Use care when connecting to telecommuni-
cations circuits, to be sure that you do not come in contact with exposed conductors or power
mains. Connect TNV signals to TNV ports only.
NOTE: ELECTROSTATIC DISCHARGE IMMUNITY
When using an Ethernet crossover cable, JDSU recommends using a shielded crossover cable
for the best immunity to electrostatic discharge (ESD).
Figure 3 SmartClass Triple Play Services bottom panel
AC Adapter
USB device port