User's Manual

Chapter 1 Getting Started
Exploring the front panel
SmartClass TPS User’s Guide
8 22035456, Rev 001 May 2014
Exploring the front panel
The controls and LEDs on the SmartClass Triple Play Services front panel, shown in Figure 1, are
used to operate the unit, set up tests, and view data.
The following paragraphs describe each of the controls and LEDs on the front panel.
Status LEDs
The LEDs on the front panel report the status of the unit. The function of each LED is described in
Table 6.
Figure 1 SmartClass Triple Play Services front panel
Table 6 Status LEDs
LED Function
Sync Reports the status of modem synchronization.
– Flashing green indicates that the modem is training.
– Solid green indicates that the modem is synchronized.
Frame Reports the status of the data connection. Solid green indicates that a data connection
has been established with the network (so that the Triple Play Services may send and
receive data on the network).
Error Reports error and alarm conditions. Solid red indicates one of the following: CRC, LOF,
LOS, LOM, or LOF.
LCD
Status LEDs
Arrow keys
Power key
Keypad
OK key
Cancel key
Utility key