User's Manual

Appendix A Specifications
Power specifications
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 163
Power specifications
Although battery life varies depending on the type of test, Table 56 provides specifications for the
battery life and the specifications for the AC adapter.
Calibration
The following section briefly discusses calibrating the SmartClass Triple Play Services unit.
Self calibration
The SmartClass Triple Play Services can be self calibrated. It includes built-in self calibration
routines that allow the instrument’s Copper measurement circuits to maintain specification for more
than 5 years. For more information on how to perform a self-calibration, see “Calibrating the unit”
on page 117.
Factory calibration
JDSU recommends that you return your SmartClass Triple Play Services to the factory every 3
years for complete inspection and calibration. For additional information about options, services,
and factory calibration, contact your local JDSU representative or contact JDSU through the
company web site, www.jdsu.com.
Warranty information
The warranties described herein shall apply to all commercially available JDSU Communications
Test and Measurement products. Any additional or different warranties shall apply only if agreed to
by JDSU in writing. These warranties are not transferable without the express written consent of
JDSU.
Hardware Warranty — JDSU warrants that Hardware Product sold to customer shall, under
normal use and service, be free from defects in materials and workmanship. Information
regarding the specific warranty period for this product can be obtained by contacting your local
JDSU Customer Service Representative, or at our web site www.jdsu.com. The warranty
period shall begin upon shipment to Customer. Hereafter these periods of time shall be collec-
tively referred to as the “Initial Warranty Period.”
Table 56 Power specifications
Parameter Specification
Operating time Greater than 4 hours (depending on type of test)
Charging time 5 hours for a fast charge; for a full charge, allow to trickle
charge overnight
Unit power input 12 V, 2.5 Amp
Power supply input 100 to 240 VAC, 50/60 Hz, autosensing
Power supply output 12 V, 2.5 Amp