User's Manual

Chapter 14 Optical Tools
Measuring optical power
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 109
5 Select Optical Power Test Menu.
This menu item appears only when an Optical Power Meter is plugged into the USB
connector; otherwise, “Insert USB Power Meter” appears.
The power meter test results appear. The measurement begins as soon as the test is
launched.
6 To change the measurement mode to relative mode, press the # key.
This sets
the current absolute power level as the new reference value.
7 To save a test report, press the utility (i) key and then select Save Report or Save To Job, and
then specify the report settings such as report name, report format, technician ID, location,
and other settings as needed.
For descriptions of the results, see “Optical power results” on page 135.