User's Manual

Chapter 11 VoIP Testing
Specifying test settings
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 89
4 If you are using H.323 call control, press the right arrow to view the Gate Keeper Settings,
and then specify the settings.
The following table describes the settings.
5 If you are using SIP call control, press the right arrow to view the Proxy Settings, and then
specify the settings.
The following table describes the settings.
6 If you are using SCCP or MGCP, press the right arrow to view the Call Manager or Call Agent
settings, and then specify the settings.
The following table describes the settings.
Setting Description
Gatekeeper Mode Specify one of the following: No Gatekeeper means no RAS (registration,
admission, and status) messages will be used, Auto Discover uses a
well known IP address and port number, Static allows you to enter the
gatekeeper address
Gatekeeper IP If the Gatekeeper mode is Static or Auto Discover mode, enter the IP
address of the Gatekeeper.
Call Control Port Enter the Call Control Port number.
This is a UDP port that is used for call control messages (for placing and
receiving calls).
RAS Port Enter the port number of the Gatekeeper.
This is a UDP port that is used for registration (RAS messages).
Remote RAS Port Enter the Remote Call Control Port number.
Setting Description
Proxy Mode Specify whether the proxy uses a Static address or no proxy.
Address Type Select IP Address or DNS Name.
Proxy IP If Address Type is IP Address, enter the IP address of the proxy server.
This is the outbound proxy, or the device from which the SmartClass will
send and receive all SIP messages. If you have a network that uses one
server for registration and another for placing and receiving calls, the
Proxy IP specifies the address for placing and receiving calls (“Alias” on
the General Settings menu specifies the registrar address).
Proxy Name If Address Type is DNS Name, enter the DNS name of the proxy server.
Proxy Port Enter the port number of the proxy.
Call Control Port Enter the Call Control Port number.
Proxy User name Enter the Proxy User name
Proxy Password Enter the Proxy Password
Setting Description
Call Manager IP /
Call Agent IP
Enter the IP address of the Call Manager or Call
Agent.
Call Manager Port /
Call Agent Port
Enter the Call Manager Port or Call Agent Port. The
range is from 1 to 65535.