User's Manual

Chapter 10 SmartID Testing
Testing the home network
SmartClass TPS User’s Guide
May 2014 22035456, Rev 001 83
After the test completes, the result test summary appears.
The test summary displays the paths between SmartIDs and indicates whether the quality of
the path between the two points is passing or failing based on pre-set limits. The left side of
the screen will show the frequency sweep and noise ingress measurement results for each
highlighted box, which corresponds to the two points between SmartIDs in the coax network.
To view other test results, press the * key and then either use the arrow keys to navigate to
different SmartID results or directly select the desired result: Test Summary, Detailed View,
Network Map, or Sweep Data. For more detail on the results, see “SmartID results” on
page 131.
8 To save a test report, press the utility (i) key and then select Save Report or Save To Job, and
then specify the report settings such as report name, report format, technician ID, location,
and other settings as needed.
Figure 17 Whole Home Test Summary (Example)