Use and Care Manual

The Bladeless Tabletop Fan can be powered either by

battery or USB connection.

1. To use USB power, simply plug the included cord into the

side of the fan (see Fig. 1). You may plug the USB end of

the cord into a desktop computer, laptop, or any other USB

outlet to power the fan.

2. To install batteries, slide the panel at the bottom of the fan in

the direction indicated by the arrow on the panel (see Fig. 2).

Install 4 AAA batteries and replace the panel.

Tabletop Bladeless Fan Instructions

Fig. 1 Fig. 2

Fig. 3 Fig. 4 Fig. 5

The adjustable angle back on the Tabletop Fan can be used

to direct the breeze.

1. Extend the easel from the back of the fan (see Fig. 4).

2. Lean the fan back to rest on the easel (See Fig. 5).

PAGE 1
Tabletop Bladeless Fan Instructions The Bladeless Tabletop Fan can be powered either by battery or USB connection. 1. To use USB power, simply plug the included cord into the side of the fan (see Fig. 1). You may plug the USB end of the cord into a desktop computer, laptop, or any other USB outlet to power the fan. 2. To install batteries, slide the panel at the bottom of the fan in the direction indicated by the arrow on the panel (see Fig. 2). Install 4 AAA batteries and replace the panel. Fig.
PAGE 2
The cooling sponge can be used to activate the Tabletop Bladeless Fan’s Cool Breeze feature. 1. To access the sponge, slide off the back panel by pushing it down (see Fig. 6). 2. Remove the cooling sponge and dampen with water. The sponge should not be wet to the point of dripping. If necessary, gently press the excess moisture from the sponge before freezing. Lay sponge flat in freezer so that it freezes in a shape that fits in the fan properly.