Specifications

SurfBeam
®
2 Satellite Modem Outdoor Unit (ODU)
Installation Guide
4-4 1104460 Rev. 001
Attention: For vertical wall mounts, fill all holes with weather-grade silicon sealer before
inserting bolts or screws. For sloped roof mounts, fill all holes with the appropriate asphalt-
based, synthetic-rubber, or acrylic co-polymer roof sealant (Figure 4-4).
Figure 4-4. Wall and Roof Mounting Options.
Step 4: Taking heed of the safety instructions mentioned at the start of this instruction manual,
carry the Antenna assembly to the Mount Tube location.
Loose the 6 nuts on the flange of the mounting bracket and slide it onto the top of the Mount
Tube (Figure 4-5).
Secure in place, then hand-tighten the Flange Nuts.