Specifications

SurfBeam
®
2 Satellite Modem Outdoor Unit (ODU)
Installation Guide
Rev. 001 1104460 3-9
Step 5: Pole Clamp Hardware Installation
The ODU sits on top of a pole (or tri mast). Loosen the six bolts on the clamping bracket until
the bracket just fits onto the pole. Tighten until the bracket is firm, but loose enough that the
ODU assembly can still be turned to accomplish the initial pointing to the satellite (Figure 3-8).
Use the compass heading provided on the work order. Once fine pointing is finished, carefully
tighten the nuts until the bracket is seated firmly on the pole so that the bracket will not move if
a strong wind hits the antenna dish.
Figure 3-8. Mounting Elevation Bracket to Pole.