Specifications

SurfBeam
®
2 Satellite Modem Outdoor Unit (ODU)
Installation Guide
3-6 1104460 Rev. 001
Figure 3-5. The TRIA Assembly.
Step 4: TRIA Installation
Start by removing the TRIA and the mounting hardware kit from its box.
The TRIA assembly is shown in Figure 3-5.
Position the TRIA onto the four mounting posts on the TRIA mounting bracket (Figure 3-6).
Note: The TRIA is positioned on the incorrect side if the TRIA cooling fins come into contact
with the TRIA Mounting Bracket.
Insert the four M5 Pozi-Pan Screws and M5 Spring Washers (included with the TRIA, not the
ODU fasteners) into the TRIA mounting holes and thread into the TRIA Mounting Bracket
(Figure XX). Tighten each screw using a number 2 Pozi-drive or Phillips screw driver.