Specifications

SurfBeam
®
2 Satellite Modem Outdoor Unit (ODU)
Installation Guide
2-10 1104460 Rev. 001
Figure 2-9. Attaching the Ground Wire to Boom Arm and Azimuth/Elevation Plate.
Step 5: Pole Clamp Hardware Installation
Position each M8 U-Bolt through the Elevation Assembly as shown in Figure 2-10. Position the
closed-hole end of the Pole Clamps onto the M8 U-Bolts, allowing the open-slot end of the Pole
Clamps to hang loose. Install the four M8 Serrated Nuts onto the M8 U-Bolts, threading the
Nuts only until the U-Bolt threads protrude through the nut.