Specifications

SurfBeam
®
2 Satellite Modem Outdoor Unit (ODU)
Installation Guide
2-6 1104460 Rev. 001
Position the TRIA Support Bracket onto the ends of the Boom Arms, aligning the screw holes.
To fasten the TRIA Support Bracket onto the ends of the Boom Arms, insert one M8 x 45mm
Carriage Bolt into each of the four square-holes in the TRIA Support Bracket, making sure that
the square shoulders on the bolt are seated in the square hole. Install one M8 Washer, One M8
Spring Washer and one M8 Nut onto each M8 Bolt and tighten with a 13mm (or 1/2") wrench
(Figure 2-5).
Figure 2-5. Assembly of TRIA Support Bracket
Step 4: TRIA Installation
Start by removing the TRIA and the mounting hardware kit from its box (Figure 2-6). Position
the TRIA onto the four mounting posts on the TRIA mounting bracket (Figure 2-7).
Note: The TRIA is positioned on the incorrect side if the TRIA cooling fins come into contact
with the TRIA Mounting Bracket.