Specifications

SurfBeam
®
2 Satellite Modem Outdoor Unit (ODU)
Installation Guide
Rev. 001 1104460 1-1
1 ANTENNA ASSEMBLY – GENERAL INFORMATION
1.1 Tools and Hardware Required
Antenna Installation will require the use of the following tools.
• Ratchet driver
• No 2 Pozi-drive / Philips screw driver
• 13 mm (or ½”) socket
• 13 mm (or 1/2”) open-ended spanner wrench
• 8 mm (or 5/16
th
) socket
• 8 mm (or 5/16”) open-ended spanner wrench
Additional Materials:
• Weather grade silicon sealant
• Approved RG6 Cable
• UV rated cable ties
Package Contents:
To avoid potential damage, the Eutelsat Tooway Ka antenna should remain in its protective
packaging until it is required for installation.
Note Figure 1-1: Never rest the dish on its edge as shown in .