User guide

3
ENGLISH
Thank you for choosing the Pace PVR box for viewing your Viasat channel packages. Please follow the
instructions in this User Guide carefully to enjoy all the advantages of digital satellite TV. We advise
following the user instructions and recommendations supplied with your box, especially for first-time
use.
Your box fully complies with international DVB (Digital Video Broadcasting) standards.
❖
Updates to your box
From time to time, your box may be updated. These updates provide enhanced features; new screens
and menus may become available. Although any new screens and menus may look a little different
from those described in this User Guide, you should be able to use the same techniques (e.g. highlight
and select) with them.
Updates will usually happen in the middle of the night. Your box needs to be in standby to receive
updates.
❖
Inserting the batteries in your remote control
Before you can use your remote control, you must insert the two supplied AA batteries as follows:
1. Push the catch at the bottom of the remote control battery cover up, then lift off the cover.
2. Insert the batteries as shown below. Be sure to match the + and – marks on the batteries to
their respective marks inside the battery compartment.
3. Replace the battery cover, by inserting the tab at the top of the cover first, then pushing the
cover into place.
✘ Don’t leave flat batteries in your remote control.
✔ Replace both batteries at the same time.
✔ Dispose of flat batteries in an environmentally-friendly way.
Welcome to digital satellite TV!