User guide

10
Using your Viasat box
Installation
1. If your TV has a SCART connector, use the supplied SCART lead to connect your box to your
TV, for improved quality picture and sound.
2. Use the supplied RF lead to connect from your box’s RF out connector (marked RF OUT - 1)
to the antenna input on your VCR.
3. Use an RF lead (not supplied) to connect your VCR to your TV as shown.
4. Connect the lead from your TV antenna to the antenna input connector (marked AERIAL IN)
on your box.
5. Connect the leads from your satellite dish to the satellite input connectors (marked INPUT 1
and INPUT 2) on your box.
Connection method 2: To TV and VCR
If you have a VCR with a SCART connector and a TV with a SCART connector, you can connect up
as shown in the diagram below.
230V 50Hz
K
C
OHS CIRTCELE FO K
S
IR
NE
P
O TON OD
NOI
TUAC
Supplied
SCART lead
Supplied RF lead
RF lead (not supplied)
Lead from your
TV antenna
TV
ANTENNA
IN
VCR
TV OUT
ANTENNA IN
IN
Supplied
Quad LNB
Leads from your
satellite dish
230V 50Hz
K
C
OHS CIRTCELE FO K
S
IR
NE
P
O TON OD
NOI
TUAC
Supplied SCART lead
Supplied RF lead
SCART lead
(not supplied)
Lead from your
TV antenna
Leads
from your
satellite dish
TV
ANTENNA
IN
VCR
TV OUT
ANTENNA
IN
IN
IN
RF lead (not
supplied)
Supplied
Quad LNB