DUMMY INSTALLATION AND DOOR PREPARATION TEMPLATE (2) FOLD TEMPLATE ALONG DOTTED LINE, AND POSITION FOLD ON THE EDGE OF THE DOOR. il TAPE TEMPLATE TO FACE OF DOOR. TEMPLATE HOLES ON DUMMY MOUNT 21 NONALIGNMENT 1 238" . ( (3) BEFORE DRILLING VERIFY THE BACKSEAT OF YOUR EXISTING DOORS IN YOUR HOUSE. DRILL PILOT HOLES USING A 5/64” DIAMETER BIT. jen FACE OF DOOR THE DUMMY MOUNT AT EITHER 3 EDGE OF boor —lzz 30R9 O'CLOCK.
