User Guide

ManualsBrandsVIA ManualsKeyboardVIA keychron s1 Keyboard

Quick Start Guide

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.

Switch To The Right System

Please make sure the system toggle on

the top left corner has been switched

to the same system as your computer’s

operating system.

The VIA Key Remapping Software

Please visit caniusevia.com to download the

latest VIA software to remap the keys.

If the VIA software cannot recognize your

keyboard, please reach out to our support

to get the instruction.

Summary of content (2 pages)

PAGE 1
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps. Quick Start Guide 1 Switch To The Right System Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system. 2 The VIA Key Remapping Software Please visit caniusevia.com to download the latest VIA software to remap the keys.
PAGE 2
4 The Backlight 3 The Layers There are four layers of key settings on the keyboard. The layer 0 and layer 1 are for the Mac system. The layer 2 and layer 3 are for the Windows system. If your system toggle is switched to Mac, then the layer 0 will be activated. Press fn + Q to change the lighting effect If your system toggle is switched to Windows, then the layer 2 will be activated.