User`s manual

(6) Power LED: PWR LED

The Power LED is light on while the system power is on. Connect the Power LED

from the system case to this pin.

(7) Power switch: PWR BTN

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the

system.

System Case Connections

PWRLED

Pin 1

SPEAK

SPKR

VCC5

Pin 1

JW_FP

Pin 1

HDLED

RESET

VCC5

GN D

VCC5

POWER LED

PWRBTN

PWRB TN

POWERL ED

HDDL ED

RSTS W

GN D

(8) FAN Headers: SFAN1(3-pin), SFAN2(3-pin), CPUFAN(4-pin)

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the

fan manufacturer, the wire and plug may be different. The red wire should be positive,

while the black should be ground. Connect the fan’s plug to the board taking into

consideration the polarity of connector.

FAN Power Headers

CPUFAN

GND

+12V

CPUFAN IN

CPUFAN OUT

FAN2

FAN1