User manual

User Manual 38

Appendix A: FLASH Memory Utility

Using this utility to update the system BIOS from a disk file to the on board Flash

memory. Be aware the improper change of the system BIOS will cause the

system to malfunction.

Using utility as follows:

1. Insert the FLASH memory utility distribution floppy diskette in drive A:

2. At the DOS prompt, type A:>AWDFLASH and press <Enter>

AwardBIOS FLASH Utility V8.36E

Flash Type –

File Name to Program:

Message:

3. Enter the name of the system BIOS disk file into the "File Name to

Program" field.

The following message appears in the "Message" field

4. Do you want to save BIOS (y/n)?

5. To update the FLASH memory from the system BIOS disk file, type Y

6. After complete updating, please re-boot the system (press “F1” key)

For upgrade BIOS procedure, please refer to our web site:

http://www.unicorn-computer.com.tw

* Please turn off system and clear CMOS data by JBAT1.

* Please restart your system and load optimal defaults setting.