User manual

33 The ENDAT-7100M System Board

The Screen will appear VIA 4in1 driver setup screen, please press “NEXT”

to continue. Please follow the steps instructed by each screen for the

installation of the VIA 4in1 driver. Restart the system after completed the

installation.

After installing the VIA 4in1 driver, please select VGA driver for install. The

system will request for “restart” after the completion of the driver installation.

The Screen can be adjusted at Display properties after the installation of

VGA driver.

We strongly recommend using the 4in1 driver to install the system since the 4in1 driver will

automatically detect / update the necessary drivers.

This driver will automatically detect and install the latest utilities as following:

IDE Bus master, VIA AGP Driver, IRQ Routing Driver, VIA INF Driver

LAN Driver:

Install the LAN driver for on-board LAN adapter.

VGA Driver:

Install the VGA driver for on-board AGP VGA adapter

Please download or check from VIA Web site:

www.via.com.tw

if you prefer to install the

drivers individually or you need more information.