User manual

27 The ENDAT-7100M System Board
IRQ/Event Activity Detect Press Enter
․ACPI Function
This function should be enabled only in operating systems that support ACPI.
Currently, only Windows® 98SE/2000/ME/XP supports this function. When
this field is enabled, the system will ignore the settings in the “Suspend Mode”
and “HDD Power Down” fields. If you want to use the Suspend to RAM
function, make sure this field is enabled then select“S3 (STR)” in the field
below.
․ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
S1 & S3
If S3 state is supported by the system, by default [S3] is
automatically selected. Otherwise [S1] is selected.
․Run VGABIOS if S3 Resume
Select whether to run VGA BIOS if resuming from S3 state. This is only
necessary for older VGA drivers.
<Choice: Auto, Yes, No>
IRQ/Event Activity Detect
Item Available Options:
PS2KB Wakeup Select Hot key
PS2KB Wakeup from S3/S4/S5 Disable
PS2MS Wakeup from S3/S4/S5 Disabled
USB Resume from S3 Disabled
PCI Master OFF
PowerOn by PCI Card Enabled
Modem Ring Resume Enabled
RTC Alarm Resume Disabled
Date (of Month) 0
Resume Time (hh:mm:ss) 0: 0: 0
․PS2KB Wakeup Select
When selecting “Password”, press <Enter> to change password. The
maximum number of characters is eight. “PS2KB Wakeup from S3/S4/S5”