User manual

23 The ENDAT-7100M System Board
․Select Display Device
This field is used to select the type of display to use when the system boots.
<Choice: CRT, LCD, CRT + LCD>
․Panel Type
Resolution & Channel Resolution & Channel Resolution & Channel
640x480x18 1CH 1280x800x24 1CH 1024x768x24 1CH
800x600x18 1CH 1366x768x24 1CH 1024x768x24 2CH
1024x768x18 1CH 800x480x18 1CH 1280x768x24 1CH
1280x768x18 1CH 640x480x18 1CH 1280x1024x24 2CH
1280x1024x18 1CH 1024x768x18 2CH
If you apply one of the standard panels shown above, select the appropriate
option according to the type of panel that you apply. Or, please contact your
dealer or sales representative for custom-made BIOS that will suit the panel
that you apply.
3-4. Integrated Peripherals
The IDE hard drive controllers support up to two separate hard drives. These
drives have a master/slave relationship that is determined by the cabling
configuration used to attach them to the controller. Your system supports two
IDE controllers--a primary and a secondary--so you can install up to four
separate hard disks.
Integrated Peripherals
Item Available Options:
VIA OnChip IDE Device Press Enter
VIA OnChip PCI Device Press Enter
SuperIO Device Press Enter
Onboard Serial Port 3 3E8
Serial Port 3 Use IRQ IRQ5
Onboard Serial Port 4 2E8
Serial Port 4 Use IRQ IRQ10
Onboard Parallel Port 2 278
Parallel Port 2 Use IRQ IRQ9
Parallel Port 2 Mode PRINTER
LPT2 ECP Mode Use DMA 3