User`s manual

User’s Manual 37
4-4. Driver Utility Installation Guide
5- When finishing the installation of Windows platform (95/98/2000/NT), please install the
relative VIA driver (
4in1) utilities for compliance compatibility of hardware environment.
6- Insert the support CD that supplied with motherboard into CD-ROM driver
which enable the access with auto-run mode; or double –click the CD driver
icon in “My Computer” to bring up the screen.
7- Select correct motherboard to install driver / utility for the system
8- Select VIA 4in1 service pack driver install to the system
38 The ENDAT-3400M System Board
9- The Screen will appear VIA 4in1 driver setup screen, please press “NEXT” to
continue. Please follow the steps instructed by each screen for the installation
of the VIA 4in1 driver. Restart the system after completed the installation.
10- After installing the VIA 4in1 driver, please select VGA driver for install. The
system will request for “restart” after the completion of the driver installation.
11- The Screen can be adjusted at Display properties after the installation of VGA
driver.
We strongly recommend using the 4in1 driver to install the system since the 4in1 driver will
automatically detect / update the necessary drivers.
This driver will automatically detect and install the latest utilities as following:
IDE Bus master, VIA AGP Driver, IRQ Routing Driver, VIA INF Driver
LAN Driver:
Install the LAN driver for on-board LAN adapter.
VGA Driver:
Install the VGA driver for on-board AGP VGA adapter
Please download or check from VIA Web site: www.via.com.tw if you prefer to install the drivers
individually or you need more information.