User`s manual

User’s Manual III
Specification:
Model ENDAT-3400M
Form Factor
Mini-ITX 170 mm x 170 mm (6.69”x6.69”)
System Chipset
VIA LUKE / LUKE-Lite (NB+CPU) + VIA VT8237R Plus(SB)
CPU Supporting
Supports 133MHz FSB by VIA Luke integrated Eden-N
533MHz/800MHz/1.0GHz
Memory
1 x 184 pin DDR socket support DDR 400/333/266 up to 1GB
Ethernet
VT8237R Plus integrated 10/100 Fast Ethernet w/ VT6103 (PHY)
VGA
Integrated VIA UniChrome™ Pro 3D/2D Graphics with SMA 16/32/64MB
LCD interface
24+24 (Option 18+18) bits w/ VT1631L (dual channel LVDS Transmitter)
Duo View
CRT+LCD
MPEG-4 & MPEG-2 Hardware decoding
(MPEG-4 only available on LUKE)
Video Interface
Hardware Rotation engine
Serial / Parallel
2 Serial Port w/+5V, +12V Power Selector / 1 Parallel port
(Optional to 6 Serial ports via I/O kit)
Watchdog Timer
Programmable WDT from 1 to 255 seconds / minutes by
Winbond W83697HF
IDE Connector
2 x 40pin IDE connector support UDMA 33/66/100/133,
1 x 44pin connector support Slim type HDD (share to IDE2)
SATA Connector
2 x 150MB/s SATA device support Raid 0, 1, JBOD
AUDIO
Integrated VT8237R Plus Audio controller w/ VT1612A Audio Codec for 2
Channel output
Expansion Slot
1x slim PCI slot up to 3 PCI slots via riser card with PCI 2.2 compliance
PS/2 Keyboard / Mouse Connector
2 x USB (2.0) + RJ-45 Connector w/LED indicator
D-sub Connector for COM 1,2 (internal box header for COM2) with
POWER
1 x 25 Pins D-Sub Connector (LPT)
1 D-Sub Connector and 1 internal box header (VGA)
1 IrDA TX/RX port with pin header
MIC-IN, Line-In, Line-Out with COM2 Module Deck
I/O Port
Pin/Box Header for KB, MS, CRT, COM 3/4/5/6, 4 x USB, CD-in, Line-out,
SPDIF-out
Digital IO
4 bit input and 4 bit output (TTL level) by pin header
RS-422/485
Via COM2 (Optional)
USB Port
6 x USB2.0 onboard
Power Supply
DC 12V input with 2 pin wafer
IV The ENDAT-3400M System Board
TABLE OF CONTENTS
CHAPTER 1. INTRODUCTION ....................................................... 1
1-1. FEATURES .............................................................................................. 2
1-2. UNPACKING............................................................................................ 3
1-3. ELECTROSTATIC DISCHARGE PRECAUTIONS ................................... 3
1-4. MOTHERBOARD LAYOUT...................................................................... 4
CHAPTER 2. SETTING UP THE MOTHERBOARD ....................... 5
2-1. JUMPERS AND CONNECTORS.............................................................. 5
2-2. INSTALLING MEMORY.......................................................................... 14
2-3. SHARED VGA MEMORY ....................................................................... 14
2-4. INSTALLING RISER CARD.................................................................... 14
2-5. ASSIGNING IRQs FOR EXPANSION CARDS ....................................... 14
2-6. WATCHDOG TIMER…………………………………………………………. 15
2-7. DIGITAL I/O…………………………………………………………...………. 17
CHAPTER 3. AWARD BIOS SETUP............................................. 18
3-1. STANDARD CMOS FEATURES............................................................. 19
3-2. ADVANCED BIOS FEATURES............................................................... 20
3-3. ADVANCED CHIPSET FEATURES........................................................ 21
3-4. INTEGRATED PERIPHERALS............................................................... 24
3-5. POWER MANAGEMENT SETUP........................................................... 28
3-6. PnP/PCI CONFIGURATIONS................................................................. 31
3-7. PC HEALTH STATUS............................................................................. 32
3-8. FREQUENCY/VOLTAGE CONTROL ..................................................... 33