User`s manual

BIOS Setup
61
IRQ/EVENT ACTIVITY DETECT
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
When Select Password,
Please press Enter key
to change Password
Item Help
IRQ/Event Activity Detect
Phoenix - Award WorkstationBIOS CMOS Setup Utility
PS2KB Wakeup Select [Hot Key]
PS2KB Wakeup from S3/S4/S5 [Disable]
PS2MS Wakeup from S3/S4/S5 [Disabled]
USB Resume from S3 [Disabled]
PowerOn by PCI Card [Disabled]
Modem Ring Resume [Disabled]
IRQ Activity Monitoring [Press Enter]
Date (of Month) 0
Resume Time (hh:mm:ss) 0: 0: 0
maximum 8 numbers.
VGA [OFF]
LPT & COM [LPT/COM]
HDD & FDD [ON]
PCI Master [OFF]
RTC Alarm Resume [Disabled]
PS2KB Wakeup Select
When selecting “Password”, press <Enter> to change password. The
maximum number of characters is eight. “PS2KB Wakeup from S3/S4/S5”
and “PS2MS Wakeup from S3/S4/S5” will be disabled while changing the
password.
Settings: [Hot Key, Password]
PS2KB Wakeup from S3/S4/S5
Sets a Hot Key to restore the system from the power saving mode to an
active state.
Settings: [Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6,
Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake, Any
Key]
PS2MS Wakeup from S3/S4/S5
Enables any mouse activity to restore the system from the power saving
mode to an active state.
Settings: [Disabled, Enabled]