User`s manual

BIOS Setup
59
HDD Power Down
Sets the length of time for a period of inactivity before powering down the
hard disk.
Settings: [Disable, 1~15(minutes)]
Suspend Mode
Set the idle time before system enters power saving mode. ACPI OS such
as Windows XP will override this option.
Settings: [Disable, 1/2/4/6/8/10/20/30/40(minutes), 1(hour)]
Video Off Option
Select whether or not to turn off the screen when system enters power
saving mode, ACPI OS such as Windows XP will override this option.
Setting Description
Always On Screen is always on even when system enters power
saving mode
Suspend -> Off Screen is turned off when system enters power saving
mode
Video Off Method
Determines the manner in which the monitor is blanked.
Setting Description
Blank Screen System only writes blanks to the video buffer.
V/H Sync + Blank System turns off vertical and horizontal synchronization
ports and writes blanks to the video buffer.
DPMS Support Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the
Video Electronics Standards Association (VESA). Use the
software supplied for your video subsystem to select video
power management values.
Modem Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on
your system. Activity of the selected IRQ always awakens the system.
Settings: [NA, 3, 4, 5, 7, 9, 10, 11]