User`s manual

Chapter 3
58
POWER MANAGEMENT SETUP
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Item Help
ACPI Function [Enabled]
ACPI Suspend Type [S1(POS)]
HDD Power Down [Disable]
Soft Off by PWRBTN [Instant-Off]
Run VGABIOS if S3 Resume [Auto]
AC Loss Auto restart [Off]
IRQ/Event Activity Detect [Press Enter]
Power Management Option [User Define]
Power Management Setup
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Suspend Mode [Disable]
Video Off Option [Suspend - > Off]
Video Off Method [V/H Sync+Blank]
Modem Use IRQ [3]
Delay Prior to Thermal [4 Min]
ACPI Function
Settings: [Enabled, Disabled]
ACPI Suspend Type
Setting Description
S1(POS) S1/Power On Suspend (POS) is a low power state. In this
state, no system context (CPU or chipset) is lost and
hardware maintains all system contexts.
S3(STR) S3/Suspend To RAM (STR) is a power-down state. In this
state, power is supplied only to essential components such as
main memory and wakeup-capable devices. The system
context is saved to main memory, and context is restored
from the memory when a "wakeup" event occurs.
S1 & S3 Depends on the OS to select S1 or S3.
Power Management Option
This option allows you to select the type (or degree) of power saving for
Doze, Standby and Suspend modes.
Setting Description
User Define Set each mode individually
Min Saving Min power saving
Max Saving Maximum power saving