User`s manual

Chapter 2
12
MEMORY MODULE INSTALLATION
The VIA VT310-DP Mini-ITX mainboard provides two 184-pin DIMM slots for
DDR400/333/266 SDRAM memory modules and supports the memory size
up to 1.5GB.
DDR SDRAM Module Installation Procedures
• Locate the DIMM sockets in the motherboard.
• Unlock a DIMM socket by pressing the retaining clips outward.
• Align a DIMM on the socket such that the notch on the DIMM
matches the break on the socket.
• Firmly insert the DIMM into the socket until the retaining clips snap
back in place and the DIMM is properly seated.
Available DDR SDRAM Configurations
Refer to the table below for available DDR SDRAM configurations on the
mainboard.
Slot Module Size Total
DIMM1 64MB, 128MB, 256MB, 512MB, 1GB 64MB-1GB
DIMM2 64MB, 128MB, 256MB, 512MB, 1GB 64MB-1GB
Maximum supported system memory 64MB-1.5GB