User`s manual

VB8001 User’s Manual
31
3131
31
CPU L2 Cache ECC Checking
Settings: [Enabled, Disabled]
Quick Power On Self-Test
Shortens Power On Self-Test (POST) cycle to enable shorter boot up
time.
Settings
SettingsSettings
Settings Description
DescriptionDescription
Description
Disabled Standard Power On Self Test (POST)
Enabled Shorten Power On Self Test (POST) cycle and boot up time
First/Second/Third Boot Device
Set the boot device sequence as BIOS attempts to load the disk operating
system.
Settings
SettingsSettings
Settings Description
DescriptionDescription
Description
LS120 Boot from LS-120 drive
Hard Disk Boot from the HDD
CDROM Boot from CDROM
ZIP100 Boot from ATAPI ZIP drive
USB-FDD Boot from USB Floppy drive
USB-ZIP Boot from USB ZIP drive
USB-CDROM Boot from USB CDROM
Legacy LAN Boot from network drive
Disabled Disable the boot device sequence
Boot Other Device
Enables the system to boot from alternate devices if the system fails to
boot from the “First/Second/Third Boot Device” lists.
Settings
SettingsSettings
Settings Description
DescriptionDescription
Description
Disabled No alternate boot device allowed
Enabled Enable alternate boot device
Boot Up NumLock Status
Set the NumLock status when the system is powered on.
Settings
SettingsSettings
Settings Description
DescriptionDescription
Description
Off Forces keypad to behave as arrow keys
On Forces keypad to behave as 10-key
Typematic Rate Setting
Enables “Typematic Rate” and “Typematic Delay” functions.
Settings: [Disabled, Enabled]