User`s manual

VB8001 User’s Manual
29
2929
29
The specifications of your drive must match with the drive table. The
hard disk will not work properly if you enter incorrect information in this
category. Select “Auto
AutoAuto
Auto” whenever possible. If you select “Manual
ManualManual
Manual”,
make sure the information is from your hard disk vendor or system
manufacturer.
Below is a table that details required hard drive information when using
the “Manual
ManualManual
Manual” mode.
Settings
SettingsSettings
Settings Description
DescriptionDescription
Description
IDE Channel The name of this match the name of the menu.
Settings: [None, Auto, Manual]
Extended IDE Drive Settings: [None, Auto]
Access Mode Settings: [CHS, LBA, Large, Auto]
Capacity Formatted size of the storage device
Cylinder Number of cylinders
Head Number of heads
Precomp Write precompensation
Landing Zone Cylinder location of the landing zone
Sector Number of sectors
Primary Master PIO Settings: [Auto, Mode 0, Mode 1, Mode 1, Mode 2,
Mode 3, Mode 4]
Primary Master UDMA Settings: [Disabled, Auto]
Primary Slave PIO Settings: [Auto, Mode 0, Mode 1, Mode 1, Mode 2,
Mode 3, Mode 4]
Primary Slave UDMA Settings: [Disabled, Auto]