User`s manual

Chapter 3
50
OnChip USB Controller
Settings: [All Disabled, All Enabled, 1&2 USB Port, 2&3 USB Port, 1&3 USB
Port, 1 USB Port, 2 USB Port, 3 USB Port]
OnChip EHCI Controller
Settings: [Enabled, Disabled]
USB Emulation
Set this field to choose the USB emulation. When set to “OFF “, do not
support any USB device on DOS. When set to “KB/MS”, support USB legacy
keyboard and mouse, no support USB storage. And set to ”ON”, support USB
legacy keyboard, mouse and storage.
Settings: [OFF, KB/MS, ON]
Watch Dog Timer Select
Settings: [Disabled, 20 sec, 30 sec, 40 sec, 1 min, 2 min, 4 min]