User`s manual

Chapter 3
48
INTEGRATED PERIPHERALS
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Item Help
SuperIO Device [Press Enter]
Onboard IDE Channel 2 [Enabled]
IDE Prefetch Mode [Enabled]
IDE HDD Block Mode [Enabled]
OnChip SATA [Enabled]
AC97 Audio [Auto]
VIA OnChip LAN [Enabled]
OnChip LAN Boot ROM [Disabled]
Onboard IDE Channel 1 [Enabled]
Integrated Peripherals
Phoenix - AwardBIOS CMOS Setup Utility
Onboard LAN Boot ROM [Disabled]
OnChip USB Controller [All Enabled]
[Enabled]
[On]
OnChip EHCI Controller
USB Emulation
SATA Mode [RAID]
[Disabled]Watch Dog Timer Select
Onboard IDE Channel 1 and 2
The integrated peripheral controller contains an IDE interface with support for
two IDE channels.
Setting Description
Enabled Activates each channel separately
Disabled Deactivates IDE channels
IDE Prefetch Mode
Settings: [Enabled, Disabled]
IDE HDD Block Mode
This allows the hard disk controller to use the fast block mode to transfer
data to and from the hard disk drive. Block mode is also called block transfer,
multiple commands or multiple sector read / write.
Setting Description
Enabled Block mode
Disabled Standard mode