User`s manual

BIOS Setup
39
CPU FEATURE
This feature IS NOT SUPPORTED for Intel Pentium® M or Celeron® M
processors.
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Thermal Monitor 1 (On
Item Help
CPU Feature
Phoenix - AwardBIOS CMOS Setup Utility
TM2 Bus Ratio [ 0 X]
TM2 Bus VID
[Enabled]
C7-M CMPXCHG8 [Enabled]
C7-M NoExecute (NX) [Disabled]
C7-M TM1/TM2 Working Temp [100]
C7-M TM Overstress Temp C [125]
ODCM [Disabled]
ACPI C4 Function [Disabled]
Thermal Management
[Thermal Monitor 1]
die throtting)
Thermal Monitor 2
(Ratio & VID transition)
o
Execute Disable Bit
[0.700V]
Thermal Management
This item sets CPU’s thermal control rule to protect CPU from overheat.
Setting Description
Thermal Monitor 1 On-die throtting
Thermal Monitor 2 Ratio & VID transition
TM2 Bus Ratio
This item sets the frequency (bus ratio) of the throttled performance that will
be initiated when the on die sensor goes from not hot to hot.
Key in a DEC number.
Settings: [Min = 0, Max = 255]