User`s manual

Installation

Intel Pentium® M or Celeron® M Select: J2, P4_1-2

These jumpers are for selecting between Intel Pentium® M or Celeron® M

processors. Shorting pin 1 & 2 of J2 will select 1.8V VCCA power; shoring pin

2 & 3 will select 1.5V. For CPU type, shorting P4_1 and

opening P4_2 will select Intel Pentium-M / Celeron-M.

J2 Setting 1 2 3

1.5V OFF ON ON

1.8V ON ON OFF

Setting P4_1 P4_2

Intel Pentium-M

/ Celeron-M

ON OFF

SATA LED / C4 Function Select: S_LED1

This jumper is for selecting between SATA LED and C4

function. Setting: shorting S_LED1 will enable SATA

LED and disable C4 function (default); opening S_LED1

will enable C4 function and disable SATA LED.

BIOS Write Protection: WP1

This jumper allows you to protect from flashing the BIOS. BIOS Write

Protection setting: pin1 = /WP & /TBL, pin2 = GND, short 1-2.

P4_1 P4_2

Pentium-M

/ Celeron-M:

WP1

S_LED1

SATA LED:

C4 Function:

1.8V:

1.5V: