User`s manual

VIA 693/693A Twin Processor Mainboard AWARD BIOS SETUP
4-14
HDD Power Down: ( Default setting: Disable )
When enabled and after the set time of system inactivity, the hard disk drive will
be powered down while all other devices remain active.
Doze Mode: ( Default setting: Disable )
When enabled and after the set time of system inactivity, the CPU clock will run
at slower speed while all other devices still operate at full speed
Suspend Mode: ( Default setting: Disable )
When enabled and after the set time of system inactivity, all devices except the
CPU will be shut off.
******* PM Events **********
VGA ( Default setting: OFF)
When set to On, any event occurring at a VGA port will awaken a system which
has been powered down.
LPT & COM
When set to On, any event occurring at a COM(serial)/LPT (printer) port will
awaken a system which has been powered down.
HDD & FDD ( Default setting: ON)
When set to
On, any event occurring at a hard or floppy drive port will awaken a
system which has been powered down.
DMA / master ( Default setting: OFF)
When set to
On, any event occurring at will awaken a system which has been
powered down.
Modem or LAN Resume ( Default setting: Disabled)
When set to
Enabled , any event occurring to the Modem Ring or LAN will
awaken a system which has been powered down.
RTC Alarm Resume ( Default setting: Disabled)
When
Enabled, your can set the date and time in the RTC (real-time clock) alarm
so that you can use the RTC alarm to wake the system from Suspend mode