User`s manual

VIA 693/693A Twin Processor Mainboard AWARD BIOS SETUP
4-11
4.7 POWER MANAGEMENT SETUP
ROM PCI / ISA BIOS (2A6LGXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Disabled Primary INTR : ON
Power Management : User Define IRQ3 (COM 2) : Primary
PM Control by APM : Yes IRQ4 (COM 1) : Primary
Video Off After : Suspend IRQ5 (LPT 2) : Primary
Video Off Method : Blank Screen IRQ6 (Floppy Disk) : Primary
MODEM Use IRQ : 3 IRQ7 (LPT 1) : Primary
Soft-Off by PWRBTN : Instant – off IRQ8 (RTC Alarm) : Disabled
HDD Power Down : Disable IRQ9 (IRQ2 Redir) : Secondary
Doze Mode : Disable IRQ10 (Reserved) : Secondary
Suspend Mode : Disable IRQ11 (Reserved) : Secondary
** PM Events ** IRQ12 (PS / 2 Mouse) : Primary
VGA : OFF IRQ13 (Coprocessor) : Primary
LPT & COM : LPT / COM IRQ14 (Hard Disk) : Primary
HDD & FDD : ON IRQ15 (Reserved) : Disabled
DMA / master : OFF ESC : Quit  : Select Item
Modem or LAN Resume : Disabled F1 : Help PU/PD/+/- : Modify
RTC Alarm Resume : Disabled F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Fig. 4-6 POWER MANAGEMENT SETUP screen.
WARNING : The selection fields on this screen are provided for the professional
technician who can modify the Chipset features to meet some specific
requirement. If you do not have the related technical background, do
not attempt to make any change except the following items.
ACPI function : (
Default setting: “Disabled”)
When Enabled, the PC system will have the ACPI function. However, if you want
to use the ACPI function, you have to use the most updated operation system like
Windows 98 at the same time. When installing Windows 98, you will have to give
some specific parameter so that the ACPI function will be installed into your PC
system.. ( please refer to the manual of Windows 98 for the parameters )