User`s manual

60
3
Award BIOS Setup Utility
complete task by themselves. Your system supports five modes, 0
(default) to 4, which primarily differ in timing. When Auto is
selected, the BIOS will select the best available mode after
checking your drive.
Auto The BIOS will automatically set the system ac-
cording to your hard disk drive’s timing.
Mode 0-4 You can select a mode that matches your hard
disk drive’s timing. Caution: Do not use the wrong
setting or you will have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/Slave
UDMA
These fields allow you to set the Ultra DMA in use. When Auto
is selected, the BIOS will select the best available option after
checking your hard drive or CD-ROM.
Auto The BIOS will automatically detect the settings for
you.
Disabled The BIOS will not detect these categories.
VIA OnChip PCI Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
Onboard AC97 Audio
Auto Select this option when using the onboard audio
codec.
Disabled Select this option when using a PCI sound card.
Onboard LAN (VIA P4X266-PE11-LA only)
By default, the onboard LAN chip is enabled. If you are not using
this function, set this field to Disabled.