User manual

40
Technical Reference Booklet
VIA Tech. VT8237 Series SATA RAID BIOS Ver 4.90
&
Create Array Sct/Clear bootable array
&
Delete Array
&
Create/Delete Spare
&
Select Boot Array
&
Serial Number View F1 : View Array/disk Status
éê : Move to next item
Enter : Confirm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
[*] Channel0 Master IC35L040AVVA07-0 ARRAY 0 ATA 100 38.34 Boot
[*] Channel1 Master IC35L040AVVA07-0 ARRAY 0 ATA 100 38.34 Boot
Duplicate Critical RAID 1 Array
When booting up the system, BIOS will detect if the RAID 1 array has any inconsistencies
between user data and backup data. If BIOS detects any inconsistencies, the status
of the disk array will be marked as critical, and BIOS will prompt the user to duplicate
the RAID 1 in order to ensure the backup data consistency with the user data.
Critical RAID 1 Critical Status
Duplicate now the RAID 1 array needs to
Continue to boot be duplicated to ensure
data consistancy.
Fault Hdd Found:
Channel 1 Device 0 Fault
Remaining members of the failed array
Channel Drive Name Array Name Mode Size(GB) Status
Channel1 Device0 IC35L040AVVA07-0 Array0 ATA 100 38.34 Mirror
Channel0 Device0 IC35L040AVVA07-0 Array0 ATA 100 38.34 Source
Note:
1)Press <ESC> to Exit.
2)After Execute,Press <TAB> immediately can into Utility Window!
If user selects Continue to boot, it will enable duplicating the array after booting into OS.