User manual

Create Disk Array

1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to

select the Create Array command and press <Enter> to call out the list of creation

steps.

VIA Tech. VT8237 Series SATA RAID BIOS Ver 4.90

Auto Setup For Data Security Create a RAID array with

Array Mode RAID 1 (Mirroring) the hard disks attached to

Select Disk Drives VIA IDE controller

Start Create Process

F1 : View Array/disk Status

éê : Move to next item

Enter : Confirm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.

Just highlight the target array mode that you want to create, and press <Enter> to

confirm the selection.

VIA Tech. VT8237 Series SATA RAID BIOS Ver 4.90

RAID 0 for performance Create a RAID array with

RAID 1 for data protection the hard disks attached to

VIA IDE controller