User manual

Main Menu

Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the

screen. The Main Menu allows you to select from various setup functions and two exit

choices. Use the arrow keys to select among the items and press <Enter> to accept and

enter the sub-menu.

Phoenix - Award BIOS CMOS Setup Utility

Standard CMOS Features

Frequency/Voltage Control

Advanced BIOS Features Load Fail-Safe Defaults

Advanced Chipset Features Load Optimized Defaults

Integrated Peripherals Set Supervisor Password

Power Management Setup Set User Password

PnP/PCI Configurations Save & Exit Setup

PC Health Status Exit Without Saving

Esc : Quit éêèç : Select Item

F10 : Save & Exit Setup

Time, Date, Hard Disk Type ... ...

(Note : The sample BIOS Setup Menu included here only shows a typical case,

and may not be exactly the same as the one on your unit.)

Note that a brief description of each highlighted item will appear at the bottom of the

screen.

Standard This setup page includes all the items of Award™ special standard

CMOS Features features.

Advanced BIOS This setup page includes all the items of Award™ special enhanced

Features features.

Advanced This setup page includes all the items of chipset special features.

Chipset Features

Integrated This section page includes all the items of IDE hard drive and

Peripherals Programmed Input / Output features.

Power This entry only appears if your system supports Power

Management Management “Green PC” standards.

Setup

PnP/PCI This entry appears if your system supports PNP/PCI.

Configurations

PC Health Status Display CPU and Case Fan Speed,etc.

Frequency/ CPU speed setting are settings of CPU speed. You should refer to

Voltage Control your CPU marking.

Load Fail-Safe The BIOS defaults that have been set by the manufacturer and

Defaults represent settings which provide the minimum requirements for

your system to operate.