User manual

Jumper Settings

This chapter explains how to configure the motherboard’s hardware. Before using your

computer, make sure all jumpers and DRAM modules are set correctly. Refer to this

chapter whenever in doubt.

JBAT1 - CMOS Clear

JBAT1 Selection

1-2* Normal*

2-3 CMOS Clear

JBAT1

Close Open * = Default setting.

J2, J3 - CPU Frequency Select Jumper

J2 J3 Select

Open 2-3 133MHz

2-3 Open 200MHz

1-2* 1-2* Auto*