User manual

Front Panel Audio Header - FPS1

This mainboard supports front panel microphone and speaker out ports.

If your computer case has these ports, connect them to FPS1.

PIN Assignment

1 MIC

2 GND

3 REF

4 POWER

5 Front Audio(R)

6 Rear Audio(R)

7 Reserved

8 Key(No pin)

9 Front Audio(L)

10 Rear Audio(L)

FPS1

Note:

If you want to use the “Front Audio” connector, you must remove 5-6,9-10

jumpers. In order to utilize the front audio header, your chassis must have

front audio connector. Also please make sure the pin assignment on the

cable is the same as the pin assignment on the MB header. To find out if

the chassis you are buying supports a front audio connector, please contract

your dealer.

FPS1