Specifications

3
Introducing the Motherboard
• Power management
• Wake-up alarms
• CPU parameters
• CPU and memroy timing
Some hardware specifications and software items are subject to change
without prior notice.
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure system features
including the following:
The firmware can also be used to set parameters for different processor clock speeds.
• Two PS/2 ports for mouse and keyboard
• One serial port
• One parallel port
• One VGA port
• Four USB ports
• One LAN port (optional)
• Audio jacks for microphone, line-in and line-out
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
• Compliant with AC’97 2.3 specification
• 16-bit Stereo full-duplex CODEC with 48KHz sampling rate
• Supports double sampling rate (96KHz) of DVD audio playback
• Direct Sound 3D
TM
compatible
Audio
This motherboard supports UltraDMA bus mastering with transfer rates of 133/100/66
MB/s.
The motherboard comes with the following expansion options:
Expansion Options
• One AGP slot
• Three 32-bit PCI v2.2 compliant slots
• Two 40-pin IDE connectors supporting up to 4 IDE devices
• One floppy disk drive interface
• Two 7-pin SATA connectors
• Supports 10 Mb/s and 100 Mb/s N-way Auto-negotiation operation
• Supports Wake-on-LAN function and remote wake-up
• Half/Full Duplex capability
Onboard LAN (Optional)
The onboard LAN controller provides either of the following features:
• Integrated 10/100/1000 transceiver
• Supports PCI rev.2.3,32-bit,33/66 MHz
• Crossover Detection & Auto-Correction
• Wake-on-LAN and remote wake-up support