Specifications
34
Using BIOS
PCI / Plug and Play Setup
This page sets up some parameters for devices installed on the PCI bus and those utilizing
the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
PCI / Plug and Play Setup
Help Item
Primary Graphics Adapter PCI
Share Memory Size 32 MB
Allocate IRQ to PCI VGA Yes
PCI IDE BusMaster Enabled
Options
PCI
AGP
Resume On Ring (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem. You must use an ATX
power supply in order to use this feature.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume at a fixed time based on the system’s RTC (realtime clock). Use
the items below this one to set the date and time of the wake-up alarm. You must use an ATX
power supply in order to use this feature.
Wake-Up Key (Any Key)
When Keyboard Power On is set to Enable, this item is available and users can enter any key,
or hot key on the keyboard or type in the password.
Press <Esc> to return to the main menu setting page.
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the PCI Modem or PCI LAN card.
You must use an ATX power supply in order to use this feature. Use this item to do wake-up
action if inserting the PCI card.
Resume On PS/2 Mouse (Disabled)
This item enable or disable you to allow mouse activity to awaken the system from power
saving mode.
Restore on AC/Power Loss (Power Off)
This item defines how the system will act after AC power loss during system operation.
When you set to Off, it will keep the system in Off state until the power button is pressed.
PS2 KB resume from S3 (Disabled)
This item enable or disable you to allow keyboard activity to awaken the system from S3
mode.
USB resume from S3 (Disabled)
This item allows you to enable or disable the USB device Wakeup function from S3 mode.
CMOS Setup Utility - Copyright (C) 1985-2003, American Megatrends, Inc.
PCI / Plug and Play Setup
: Move
F10: Save
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
mn
Resume On PME# (Disabled)
< >